MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
40.000 feet
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
60.000 feet
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
15.000 hertz single antenna element and 2.000 megahertz single antenna element
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
-50.0/+140.0 degrees fahrenheit
MRC:
A letter or group of letters used to designate the particular coaxial connector series.AHUC
Coaxial Connector Series Designation:
N single antenna element
MRC:
The design of the connector end.AHUD
Connector End Design:
Socket single antenna element
MRC:
The orientation of the electrical vector of energy radiated from the item relative to the line of propagation.AJCT
Electromagnetic Polarization Type:
Vertical single antenna element
MRC:
The graphical representation of the radiation pattern of the device as a function of direction.AJCU
Radiation Pattern:
Bidirectional single antenna element
MRC:
The reactance-resistance complex value which must be matched by the transmission line and termination to achieve lowest standing wave ratio,expressed in ohms.AJDD
Characteristic Impedance In Ohms:
70.0 single antenna element
MRC:
The specification,standard,or the number or symbol of the manufacturer used to identify the termination.AJDF
Termination Identification:
32225 single antenna element
MRC:
The identifying numeric code of the originator that controls or manufactures the termination.AJDG
Termination Manufacturer Code:
74868 single antenna element
MRC:
The means used to direct a beam/s/ of energy successively over a given region.AJDH
Beam Scanning Method:
Fixed single antenna element
MRC:
Indicates the design type of the item.APGF
Design Type:
Crossed loop single antenna element
MRC:
The means of attaching the item.AXGY
Mounting Method:
Clamp
MRC:
Indicates the type of terminal for providing electrical connection to the item.CSCF
Terminal Type:
Connector, receptacle single antenna element
MRC:
The angle between two opposite half-power (three decibel (3 db)) points of the beam.CTLS
Beam Width Angle:
180.0 degrees horizontal single antenna element and 90.0 degrees vertical single antenna element
MRC:
The ratio of the signal intensity of an item radiated in a specific direction to the signal intensity radiated in the same direction by a standard device,expressed in decibels.CTMN
Power Gain In Decibels:
0.00 single antenna element
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
11874-ssll-24 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).