TXT
묘사:
Electrical Contact Assembly
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
20
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.995 inches and 2.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.095 inches and 0.100 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.185 inches
MRC:
The number of contacts which provide electrical connection.AFRA
Contact Quantity:
20
MRC:
The basic structure of the item.ALXF
Structural Design:
Nonswitching
MRC:
The name of the contact/s/ assigned by the controlling government agency.APDJ
Contact Item Name Assigned By Government Agency:
Electrical contact assembly
MRC:
The name of the government agency controlling the contact/s/.APDK
Government Agency Controlling Contact:
Dla
MRC:
An identifying number assigned by the government agency controlling the contact/s/.APDL
Contact Identifying Number Assigned By Government Agency:
5908092-2
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Contacts and shell gold
MRC:
An indication of the precious material contained in the item,and the amount per a measurement scale.PMWT
Precious Material And Weight:
0.005 gold grains, troy
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Gold
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
99167-5908092 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
