부품 정보
Locking mechanism; knob material: plastic; locking lever material: plastic
MRC:
The number of setscrew holes included on the item.ABFR
Setscrew Hole Quantity:
2
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
1.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft accommodation.ABHH
Shaft Accommodation Style (non-core):
Err-090
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.812 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Setscrews and screw on
Knob Portion Diameter:
1.125 inches
MRC:
The order of the numeric scale markings of the dial.ABWD
Scale Direction And Range:
90 to 0 clockwise second scale
MRC:
The order of the numeric scale markings of the dial.ABWD
Scale Direction And Range:
0 to 14 clockwise first scale
MRC:
The number of scale divisions.ABWG
Scale Division Quantity:
100 second scale
MRC:
The number of scale divisions.ABWG
Scale Division Quantity:
15 first scale
MRC:
The number of turns of the dial in relation to one turn of the knob or other actuating mechanism.ABWS
Drive Ratio:
15.0 single
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Direct and gear
MRC:
Indicates the type of scale.ATEQ
Scale Type:
Linear all scales
MRC:
Indicates the type of drive provided for turning,rotating,or positioning the screw.CBSC
Screw Drive Type:
Cross recess type 1
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 receptacle
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.375 inches receptacle
MRC:
Indicates the type of mechanism used for positioning the item.CRRL
Positioning Mechanism Type:
Knob dual
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
1.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round w/knob
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf receptacle
