부품 정보
Power over ethernet surge protector, 60-volt
TXT
묘사:
Electrical Surge Arrester
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Plastic
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
3
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Connector, plug and wire lead
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
5.0 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.0 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.0 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Case
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
4940-01-551-2884; an/tsm-214a
MRC:
Indicates the designed use of the item.ALBY
Usage Design:
Indoor
MRC:
Indicates the designed use of the item.ALCD
Usage Design:
Protect wireless access points from damaging power transients and surges. Protect data lines for both line-to-line and ground-to-line surges
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Freestanding, may be mounted via clamping device
MRC:
The voltage at which the item will break down.AQAQ
Breakdown Voltage:
60.0 volts
MRC:
The measured weight of an item unencumbered by packaging or packing material.AWJN
Unpackaged Unit Weight:
0.218 pounds
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Pins 1, 2, 3, and 6: peak pulse current 10/100 waveform: 132 amps protection differential and common mode response time <5 ns shunt capacitance () <25 pf standard clamping voltage 7.5 volts pins 4, 5, 7, and 8: peak pulse current 10/100 waveform: sp075a: 50 amps; protection differential and common mode, line to ground response time <5 ns standard clamping voltage 60 volts
