부품 정보
Gasket, sponge rubber
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Rectangular
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Extruded
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
30.0 astm scale and 45.0 astm scale
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
100 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-70.0 degrees fahrenheit and 220.0 degrees fahrenheit
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
25.000 feet
MRC:
The condition of the item with respect to the texture of the surface.ADTX
Surface Condition:
Smooth both sides
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
3.000 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
1.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Acid resistant and petroleum
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Missile, minuteman lgm-30
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Self-extinguishing flame resistance
MRC:
The substances and/or materials contained in the item that have been identified as hazardous or environmentally damaging by the environmental protection agency or other authorized government agency.HZRD
Hazardous Substances:
Oil and petroleum
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Rubber, mil-std-670, type s, class sc, style e, grade sce3f or rubber, synthetic, mil-std-670, type s, class sc, grade sce3
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr or rubber chloroprene class cr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-std-670, type s, class sc, style e, grade sce3f military specification 1st material response and mil-std-670, type s, class sc, grade sce3 military specification 2nd material response
