부품 정보
Wire mesh of aluminum wire ams-4182, alloy 5056, w/gasket 0.093 in. Thick of nickel alloy 270 and rubber, zz-r-765, class iii
TXT
묘사:
Observation Window
MRC:
The actual number of full layers of material.AAFW
Ply Quantity:
2
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.480 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.290 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.155 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Dry heat resistant and mildew resistant
First Corner Radius:
0.090 inches
Second Corner Radius:
0.090 inches
Third Corner Radius:
0.090 inches
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Clear
Fourth Corner Radius:
0.090 inches
MRC:
Wire mesh pattern is the definite pattern of twisted or welded wire.AKVN
Wire Mesh Pattern:
Square
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Beveled
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
9000 pounds per square inch
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Red
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
L-p-391, item a, type 1, grade c federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rounded corners
