부품 정보
Vertical slot in head 0.100 in. Wide by 0.190 in. Long
TXT
묘사:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Thumb no. 4
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
Between 0.016 inches and 0.047 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.123 inches and 0.126 inches
Under Head Length:
Between 3.672 inches and 3.703 inches
MRC:
A measurement taken at right angles to the length of a head,in distinction from thickness.ABQX
Head Width:
Between 0.203 inches and 0.234 inches
Pin Chamfer Angle:
Between 44.5 degrees and 45.5 degrees
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.297 inches and 0.328 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764, cond a federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-f-14072 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
