MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
18.750 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
5.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
16.750 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 48.0 hertz and 440.0 hertz
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+0.500/+1024.000 megahertz
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ground wave emergency network (gwen) an/urc-117
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
100.0 volts and 120.0 volts and 220.0 volts and 240.0 volts
MRC:
The number of specified ranges of frequencies or wavelengths operating between two stated limits.ANLC
Frequency Band Quantity:
11
MRC:
Indicates the type of modulation provided.AYYE
Modulation Type:
Am and fm and pulse
MRC:
An indication of the calibrated signal range that is output by the item.BHFZ
Calibrated Signal Output Range:
Plus 18 to 145 dbm in 0.5-512 mhzfrequency range & 12 to 145 dbm above 512 mhz
MRC:
Indicates the location of the modulator on the item.BHGD
Modulator Location:
Any acceptable
MRC:
The number of complete cyclic changes,per unit of time,for which the modulation is rated.BHQD
Modulated Frequency Rating:
0.4 kilohertz and 1.0 kilohertz
MRC:
The number of complete cyclic changes,per unit of time,for which the pulse repetition is rated.BHQF
Pulse Repetition Frequency Rating:
Between 0.05 kilohertz and 500.00 kilohertz
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Includes reverse power protection
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Testing and troubleshooting the uhf radio set
