MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Rack
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
27.250 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
18.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
15.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.0 hertz
MRC:
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.ADTV
Case Material:
Aluminum
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the case.ADTY
Case Surface Treatment:
Enamel, gray crackle
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+88.000/+140.000 megahertz
MRC:
The number of parts supplied with the item which may be required for application.AFHS
Accessory Component Quantity:
10
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Type no. Md-83/ //arn
MRC:
The name of the government agency or commercial organization that controls the manufacture of the accessory item.AKVY
Accessory Controlling Agency:
Jcens
MRC:
The specific number used to identify the accessory.AKVZ
Accessory Identifying Number:
Cy-1068/u type no. And cg-409/u type no. And ug-201/u type no. And ug-528/u type no. And ug-529/u type no. And pp-348/arn type no. And cy-1069/u type no. And cx-237/u type no. And cx-1290/u type no.
MRC:
The name assigned to the item by the joint electronics type designation system.AKWA
Joint Electronics Type Designation System Item Name:
Signal generator
MRC:
The type number assigned to the item by the joint electronics type designation system.AKWB
Joint Electronics Type Designation System Item Type Number:
Sg-1a/arn
MRC:
An indication of whether or not a facility/ies/ to accommodate a battery/ies/ is included.ALSF
Internal Battery Accommodation:
Not included
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
115.0 volts
MRC:
The number of specified ranges of frequencies or wavelengths operating between two stated limits.ANLC
Frequency Band Quantity:
1
MRC:
Indicates the type of modulation provided.AYYE
Modulation Type:
Am
MRC:
The name of the accessory component assigned by the controlling agency.AZCG
Accessory Component Name:
Case 2; cord 2; adapter 1; adapter connector 2; handbook 1; power supply 1; power cable assembly 1
MRC:
The degree of conformity of a measurement to a standard or true value for which the calibration is rated.BDHW
Calibration Accuracy Rating:
0.15 pct accuracy of calibration
MRC:
An indication of whether or not a crystal controlled feature is provided.BHFY
Crystal Controlled Feature:
Provided
MRC:
An indication of the calibrated signal range that is output by the item.BHFZ
Calibrated Signal Output Range:
0.1 uv to 2000000 uv calibrated output
MRC:
An indication of the signal output constancy.BHGC
Signal Output Constancy:
Porm 0.5db maximum variation from 30 cycles to 11kc, porm 0.1db maximum variation from 90 to 150 cycles, porm 0.1db maximum variation from 9500 cycles to 10.5 kc
MRC:
Indicates the location of the modulator on the item.BHGD
Modulator Location:
Internal
MRC:
The number of complete cyclic changes,per unit of time,for which the modulation is rated.BHQD
Modulated Frequency Rating:
0.4 kilohertz and 1.0 kilohertz
MRC:
An indication of the degree of modulation provided.BHQG
Modulation Degree:
Between 0.0 percent and 100.0 percent
MRC:
The number of alternating current phases.FAAZ
Phase:
Single