TXT
묘사:
Grooved Clamp Coupling
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Grooved retainer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.500 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.312 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
Not rated
MRC:
A measurement of the smallest dimension of the retainer,in distinction from length or width.ADTJ
Retainer Thickness:
0.105 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
A/f-18 acft
MRC:
The maximum load for which the item is rated.AGCS
Maximum Load Rating:
Not rated
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the latch.AGPR
Latch Style:
Single
MRC:
The measurement of the included angle,expressed in degrees.AKZZ
Included Angle In Deg:
38.5
MRC:
Indicates the type of nut used in conjunction with the item.ALDS
Nut Type:
Self-locking cap
MRC:
The number of segments included in the item.ALDT
Segment Quantity:
1
MRC:
An indication of whether or not a sealing inner liner is included.ALDW
Sealing Inner Liner:
Not included
Retainer Width:
0.440 inches
Root Width:
Between 0.143 inches and 0.153 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5732, comp 660 trunnion err-100 err-100 and iron alloy, ams 5732, comp 660 bolt err-100 err-100 and iron alloy, ams 5732, comp 660 pin err-100 err-100 and iron alloy, ams 5732, comp 660 nut err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron alloy, ams 5525, comp 660 err-100 err-100 or iron alloy, ams 5732, comp 660 err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Passivated, qq-p-35 err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Silver plated nut err-100 err-100
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.177 inches and 0.225 inches
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Nut silver
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Silver
MRC:
The physical configuration of the item.SHPE
Shape:
Round
