TXT
묘사:
Aircra Pneumatic Tire Inner Tube
MRC:
The primary application for which the item is designed.AAFS
Application Design:
Aircraft main wheel, type iii low pressure
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Rubber, synthetic
MRC:
Indicates the type of valve or spud provided to facilitate inflation of the item.ABBS
Inflation Device Type:
Tr67
MRC:
An indication of the relative position of an inflation valve or spud in relation to the inner tube centerline.ABBT
Inflation Device Position:
On center
MRC:
A feature built into the item which applies to its ability to retain air if punctured.ABBW
Construction:
Regular
MRC:
The construction of that portion of the item which is in contact with the tire flap or rim when installed in a pneumatic tire.ABBX
Base Construction:
Standard
MRC:
The maximum load in tension applied,to a splice,in a longitudinal direction per unit of cross-sectional area that the material can withstand without rupture.ABBY
Splice Minimum Rated Tensile Strength:
400 pounds per square inch
MRC:
The minimum and maximum operating temperatures at which the item is rated,expressed in degrees celsius.ASQJ
Operating Tempurature Range In Deg Celsius:
-54.0/+93.0
MRC:
The minimum and maximum operating temperatures at which the item is rated,expressed in degrees celsius.ASQJ
Operating Tempurature Range In Deg Celsius:
-54.0 to 93.0
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
750 pounds per square inch
Tire Valve Designation:
Tr-67
Item Type Category:
Accessory
Accessory Type:
Inner tube
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
3 type and 1 class
