부품 정보
Weapon system essential
TXT
묘사:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.2500 inches both ends
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.468 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.875 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.468 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
1 both ends
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
No. 4-40 thd size both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.1873 inches first end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.2500 inches first end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
4935-00-930-7250, lcss surface to surface missile system
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight first end
MRC:
The element, compound, or mixture of which the bellows are fabricated, excluding any surface treatmentAJGA
Bellows Material:
Copper alloy
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Setscrews 2
MRC:
Indicates the design type of the item.APGF
Design Type:
Bellows
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole first end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
2 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: 2 holes located at 120 degrees angle
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
