MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Conical
MRC:
An indication of the species and grade of the item,and the grading association.CQWY
Species-grade And Grading Association:
Softwood ungraded unrecognized
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Moisture Content Retention Percentage:
Any acceptable
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
10.000 inches specified
MRC:
The defect free characteristics of the item.CSFD
Defect Free Characteristics:
Checks-splits-shakes and knots
MRC:
The required purpose or application of the typical wood products for which the item is intended.CSTS
Typical Wood Products Use:
Damage control
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference,and the location on the item.CSTX
Diameter And Location:
8.000 inches bottom err-100 err-100
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference,and the location on the item.CSTX
Diameter And Location:
4.000 inches top err-100 err-100
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference,and the location on the item.CSTX
Diameter And Location:
4.000 inches top
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference,and the location on the item.CSTX
Diameter And Location:
8.000 inches bottom
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Unit of issue--each
