MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.250 inches and 0.254 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.240 inches and 0.260 inches
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the outside circumference.AHMG
Large End Outside Diameter:
0.625 inches
MRC:
A measurement taken at right angles to the length of the split,in distinction from thickness.BXBS
Split Width:
0.032 inches
MRC:
A measurement of the longest dimension of the tapered portion,in distinction from width.BXBT
Tapered Portion Length:
0.250 inches
MRC:
The included angle of the taper.BXBW
Taper Included Angle:
16 degrees 45 minutes min, 17 degrees 15 minutes max
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium or cadmium and chromate or cadmium and phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416 federal specification single treatment response
