TXT
묘사:
Self-aligning Plain Bearing
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.4995 inches and 0.5000 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease, mil-g-23827 and lubricant, solid film, mil-l-8937, form a
Outer Member Outside Diameter:
Between 0.9995 inches and 1.0000 inches
Outer Member Width:
Between 0.3850 inches and 0.3950 inches
Inner Member Width:
Between 0.4950 inches and 0.5000 inches
MRC:
The limiting radial load which the item can carry at rest without permanent deformation of the stressed surface or the danger of fracture.AGKP
Static Radial Load Rating:
9750 pounds
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
56.0 rockwell c inner member
MRC:
The feature inherent in the item design to effect lubrication.CTLM
Lubrication Feature:
Groove external outer member
MRC:
The feature inherent in the item design to effect lubrication.CTLM
Lubrication Feature:
Groove internal inner member
MRC:
The feature inherent in the item design to effect lubrication.CTLM
Lubrication Feature:
Groove internal outer member
MRC:
The feature inherent in the item design to effect lubrication.CTLM
Lubrication Feature:
Perforation outer race member
MRC:
The feature inherent in the item design to effect lubrication.CTLM
Lubrication Feature:
Perforation inner member
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy outer race member
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e52100 inner member
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromium inner member
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium outer race member
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Without insert or liner with staking groove
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-b-8976 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
