MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
40.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Standard duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
General
MRC:
Indicates the design type of the item.APGF
Design Type:
Plain
MRC:
The means used to operate the item.APHE
Operation Method:
Manual
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
5.0
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Permanent gap
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
2
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
1
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+20.0/+2500.0
MRC:
A measurement of the actual swing over the bed of the item.BTTF
Actual Swing Over Bed:
14.187 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
8.375 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
4
MRC:
A measurement of the actual swing through the open gap.BTWD
Actual Swing Through Open Gap:
21.000 inches
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
2.062 inches
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Hand
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Hand
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single or three
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Front loading chip tray for easier cleaning; footbrake; 81 (l) x 36 (w) x 60 (h); digital display; hardened and ground gears and bedways; cast iron machine
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
