부품 정보
With 1/16 in. By 45 degrees chamfer on head end and 1/32 in. By 45 degrees chamfer on shoulder end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.937 inches
Offset Distance Between Geometric Center Of Head And Centerline Of Shank/shoulder:
Between 0.115 inches and 0.125 inches
First Step Diameter:
Between 0.749 inches and 0.750 inches
First Step Length:
0.437 inches
Second Step Diameter:
Between 0.499 inches and 0.500 inches
Second Step Length:
0.968 inches
Third Step Diameter:
Between 0.247 inches and 0.248 inches
Third Step Length:
0.407 inches
MRC:
The number that designates the enlarged portion of the shank whose centerline is not collinear with the centerline of the head of an item.ACHW
Numeric Designation Of Step Eccentric To Head:
2
Pin Head Diameter:
Between 0.433 inches and 0.436 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shoulder end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
1.125 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 cond a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Eccentric
