TXT
묘사:
Permanent Magnet Loudspeaker
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Wire lead
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.938 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.ABKQ
Center To Center Distance Between Mounting Facilities Parallel To Length:
4.875 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR
Center To Center Distance Between Mounting Facilities Parallel To Width:
6.875 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
8.000 inches
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+200.0/+5000.0
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+200.0 to 5000.0
MRC:
The amount of electrical energy that can be dissipated.AJDB
Power Rating:
10.00 watts peak
MRC:
A measurement of the longest dimension of the transducer,in distinction from width.AKNR
Transducer Length:
Any acceptable
MRC:
A measurement taken at right angles to the length of the transducer,in distinction from thickness.AKNS
Transducer Width:
Any acceptable
MRC:
The means provided for attaching the horn to the item.AKNX
Horn Mounting Facility:
Snap fastener
MRC:
The number of mounting facilities used as a means of attaching the horn to the item.AKNY
Horn Mounting Facility Quantity:
1
MRC:
The length of a straight line which passes through the center of a voice coil,and terminates at the circumference.AKPB
Voice Coil Diameter:
Any acceptable
MRC:
The total opposition /resistive and reactive/ which the transformer primary winding offers to the flow of alternating current,expressed in ohms.AKPD
Transformer Primary Impedance Rating In Ohms:
600.0 and 1200.0 and 1800.0 and 2400.0 and 3000.0
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
1
MRC:
Indicates the type of device that converts energy from one form to another.AKVS
Transducer Type:
Diaphragm
MRC:
Indicates the designed use of the item.ALBY
Usage Design:
Outdoor
MRC:
The installation for which the item is designed.AMQY
Installation Design:
Nonportable
MRC:
The total opposition /resistive and reactive/ which the item offers to the flow of alternating current,expressed in ohms.AWZH
Impedance Rating In Ohms:
16.0 voice coil
MRC:
The means of attaching the item.AXGY
Mounting Method:
Flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Horn
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-l16225 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
