MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.118 inches and 0.138 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 0.240 inches and 0.260 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
Between 0.140 inches and 0.180 inches
MRC:
The number of setscrew holes included on the item.ABFR
Setscrew Hole Quantity:
2
MRC:
The distance from the center of the hole to the base of the knob or base of skirt if with integrally molded skirt.ABFU
Distance From Hole Center To Knob/skirt Base:
Between 0.235 inches and 0.255 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the unthreaded stud.ABFX
Unthreaded Stud Style:
Flatted, one side
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
Between 0.540 inches and 0.580 inches
MRC:
The number of curved indentations separated by grooves.ABHA
Fluted Foil Quantity:
8
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft accommodation.ABHH
Shaft Accommodation Style:
Counterbored
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.730 inches and 0.770 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Setscrews and shaft
MRC:
An outside measurement taken at right angles to the length of an item,in distinction from thickness.ADJV
Outside Width:
Between 0.107 inches and 0.109 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.640 inches and 0.680 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-17a acft
MRC:
The length of a straight line which passes through the center of a stud,and terminates at the circumference.AGRJ
Stud Diameter:
Between 0.127 inches and 0.129 inches
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Clear
MRC:
Indicates the type of drive provided for turning,rotating,or positioning the screw.CBSC
Screw Drive Type:
Hexagon socket
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
40 setscrew
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.112 inches setscrew
MRC:
Indicates whether or not the skirt is designed as an integral part of the item.CRWX
Skirt Design:
Nondetachable
MRC:
Indicates whether or not the pointer is designed as an integral part of the item.CSKT
Pointer Design:
Nondetachable
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Setscrew is ms51021-103
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Gray, federal standard 595, 36231
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round fluted
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc setscrew
