TXT
묘사:
Filler Opening Cap
MRC:
Indicates the type of gripping accommodation used as an aid in the application of torque.ABEZ
Gripping Accommodation Type:
Lobes
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.340 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.478 inches
MRC:
Indicates the type of system in which the item is designed to be used.AGEJ
System For Which Designed:
Pressurized
Sealing Length:
0.740 inches
MRC:
The means provided for relieving pressure from an item.ALGN
Pressure Relief Method:
Manual
MRC:
The maximum working pressure at which an item is designed to operate.BPHD
Maximum Working Pressure:
13.000 pounds per square inch
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Seal
MRC:
The length of a straight line which passes through the center of the filler neck for which the item is designed.CQST
Filler Neck Diameter For Which Designed:
1.500 inches
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
Lever must be down for vehicle operation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel vent actuator
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium vent actuator
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Closed cooling system type w/ loose vacuum valve
