TXT
묘사:
Plug-in Electronic Compon Socket
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Mica
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Pcb, 90 degrees angle
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Molded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.031 inches
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
0.156 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.156 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.047 inches
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
0.625 inches
MRC:
The opposition to the flow of current through mating contacts of an item,expressed in ohms.AFDM
Contact Resistance In Ohms:
0.030
MRC:
The name of the equipment the item is specifically designed to accommodate.AFJE
Specific Equipment Accommodated:
Electron tube
MRC:
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.AFRC
Contact Maximum Current Rating In Amps:
1.0
MRC:
The element,compound,or mixture of which the contact/s/ is fabricated,excluding any surface treatment.AFRG
Contact Material:
Beryllium copper
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the contact surface.AFRH
Contact Surface Treatment:
Gold
MRC:
The number of contacts accommodated by the item.AFRL
Accommodated Contact Quantity:
9
MRC:
The arrangement of holes in a printed circuit board provided to accommodate terminals,polarization pin,and/or center shield.AKWJ
Printed Circuit Board Hole Arrangement Style:
Thirteen hole
MRC:
The means of attaching a component shield.AKWK
Component Shield Mounting Method:
Bayonet
MRC:
Indicates the type of polarization used to prevent mismating.AKWN
Polarization Type:
Contact position
MRC:
The element,compound,or mixture of which the shield base is fabricated,excluding any surface treatment.AKWY
Base Shield Material:
Brass
MRC:
The plating,dip,and/or coating applied to the shield base for environmental protection or to increase functional efficiency.AKWZ
Base Shield Surface Treatment:
Nickel
Projection Length Above Mounting Surface:
1.000 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Terminal
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Printed circuit
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact positions.CRPY
Contact Position Arrangement Style:
Circular
MRC:
The maximum potential,expressed in volts,and the current type that may be applied continuously to the contacts without damage.CSKW
Contact Maximum Voltage In Volts And Current Type:
500.0 ac and 500.0 dc
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Contact surfaces gold
MRC:
An indication of the precious material contained in the item,and the amount per a measurement scale.PMWT
Precious Material And Weight:
0.009 gold grains, troy
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Gold
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
7 pin
