부품 정보
(inavy)adapter body, tube-hose, aircraft
TXT
묘사:
Tube-hose Adapter Body
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.032 inches
MRC:
The length of a straight line which passes through the center of the tube for which designed,and terminates at the outside circumference.ACSV
Tube Outside Diameter For Which Designed:
0.375 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.ACTE
First End Seat Angle In Deg:
45.0
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Hydraulic system, in; f/a-18e/f
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.190 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
1.830 inches
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
5000.0 pounds per square inch any acceptable
MRC:
A measurement of the working temperature and the type of service for which rated.CDPH
Working Tempurature And Service Type:
275.0 degrees fahrenheit any acceptable
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Body, adapter, o-ring; adapter assembly-beam seal to axial swage bulkhead, bulkhead sealing 5000psi
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Titanium alloy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Adapter body
