TXT
묘사:
Calibrated Flow Valve
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Iron, cast
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Hydraulic oil
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Plain face flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
Plain
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the end flange.ACKT
First End Flange Shape Style:
Rectangular (includes square) w/ bolt holes
MRC:
A measurement of the smallest dimension of the first end flange, in distinction from length or width.ACKU
First End Flange Thickness:
Any acceptable
MRC:
A measurement of the longest dimension of the first end flange, in distinction from width.ACKV
First End Flange Length:
3.500 inches
MRC:
A measurement taken at right angles to the length of the first end flange, in distinction from thickness.ACKW
First End Flange Width:
2.625 inches
MRC:
The length of a straight line which passes through the center of a bolt hole,and terminates at the circumference.ACLA
First End Bolt Hole Diameter:
0.400 inches
MRC:
The element,compound,or mixture of which the flow control device is fabricated.ADQV
Flow Control Device Material:
Steel
MRC:
The rated valve discharge capacity per unit of time.ADSY
Valve Discharge Flow Rate:
0.0 gallons per minute and 10.0 gallons per minute
MRC:
Indicates the basic design type used for regulating the item.AEVN
Regulation Type:
Automatic single stage
MRC:
The maximum pressure of the media on the inlet side at which an item is designed to operate.AEVZ
Maximum Inlet Pressure Rating:
5000.0 pounds per square inch
First End Center To Center Distance Between Holes Along Length:
2.720 inches
First End Center To Center Distance Between Holes Along Width:
1.975 inches
