TXT
묘사:
Centrifugal Fan Assembly
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
28.0 millimeters
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
40.0 millimeters
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
19000.00
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/src-55 lop
MRC:
The length of a straight line which passes through the center of the outlet,and terminates at the inside circumference.AJLW
Outlet Inside Diameter:
38.4 millimeters
MRC:
The static pressure measured at the air flow rate specified.AJLY
Static Pressure At Specificationified Air Flow Rate:
2.01 inches of water
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Direct
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 unthreaded hole
MRC:
The direction of rotation for which the item is designed.AYSY
Rotation Direction For Which Designed:
Clockwise
MRC:
The rated capacity of air flow moved through the item.CQKX
Air Flow Rate:
23.4 cubic feet per minute
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
12.0 dc
MRC:
The rated power of the prime mover.CSYL
Prime Mover Power Rating:
9.0 watts
MRC:
The direction in which the item discharges during operation.CXCB
Discharge Direction:
Horizontal
MRC:
Indicates the type of shaft bearing/s/ furnished.CXHN
Shaft Bearing Type:
Ball
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
40.0 millimeters
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic housing
