MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
150.0 inch-pounds
MRC:
A measurement of the longest dimension of a key,in distinction from width.AAST
Key Length:
Shaft extends 1-5/16 in. From housing
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Face
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.313 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
6
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
1/2-14
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
3/4 in. Diameter drive shaft
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
3600.0
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Keyway
MRC:
The element,compound,or mixture of which the housing is fabricated.AJLF
Housing Material:
Iron, cast
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Npt
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Inlet and outlet
MRC:
The maximum rated working pressure of an item at a specified temperature range.AXFB
Maximum Working Pressure Rating At Specificationified Tempurature Range:
1000 psi
MRC:
The design of the connection.AXFC
Connection Design:
Threaded
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Constant
MRC:
An indication of the constant displacement per revolution.AXFQ
Constant Displacement Per Revolution:
0.960 cubic inches
MRC:
The spacing in the arrangement of the mounting bolt holes.AZFG
Mounting Bolt Hole Spacing:
Mounting holes spaced 45 degrees on 3-1/16 in. Bolt circle
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.AZFH
Housing Surface Treatment:
Enameled
