부품 정보
One hole 0.240 in. Min and 0.260 in. Maximum on one end and one hole 0.302 in. Min and 0.322 in. Maximum on opposite end; tab 0.190 in. Min and 0.210 in. Maximum along length and 0.830 in. Min and 0.890 in. Maximum along width with 0.06 in. Bend, 30 degree radius
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.420 inches and 1.480 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.830 inches and 0.890 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.010 inches and 0.014 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 0.800 inches and 0.860 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.400 inches and 0.460 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.290 inches and 0.350 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Rotary actuator/installation, f-16c/d common
MRC:
The structural characteristic of the item.CQCF
Construction:
One-piece
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, class 3 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
