TXT
묘사:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
3.820 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
5.0 absolute
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Hydraulic power asy, winch hydrographic
MRC:
Indicates the design type of the item.APGF
Design Type:
Nonreusable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between 20.0 degrees fahrenheit and 250.0 degrees fahrenheit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
5.970 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Working pressure: 500 psi; burst pressure: 1000 psi; flow: 35 gpm; porting size: sae-12 o-ring; thread size: 1 3/8-12in; gasket od: 2.76in; gasket id: 2.48in; filter media: synteq synthetic media; filter head snout/post must be lubricated before spinning on a new filter to prevent thread damage; element collapse rating: 150 psid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel/oil, hydrocarbon
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical w/ integral outer casing
