TXT
묘사:
Upright Drilling Machine
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Bench
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
An indication of whether or not a treatment is included to produce a fungus resistant condition.AKSQ
Fungus Resistant Treatment:
Not included
MRC:
An indication of whether or not shielding against radio interference is provided.ALBH
Radio Interference Shielding:
Not provided
MRC:
An indication of whether or not a reversible rotation feature is included.ALYE
Rotation Reversibility Feature:
Not included
MRC:
Indicates the type of feed provided.AQDD
Feed Type:
Hand
MRC:
The number of spindles provided.BCRH
Spindle Quantity:
1
MRC:
Indicates the type of main drive provided for turning,rotating,or positioning the mechanism.BNQL
Main Drive Type:
Electric motor
MRC:
Designates the commercial taper size of the spindle socket.BNRK
Spindle Socket Taper Size:
2 morse
MRC:
The distance the spindle will travel.BNRL
Spindle Travel Distance:
4.375 inches
MRC:
The drilling capability/ies/ of the item.BNRY
Drilling Capability:
5/8 in. Drilling capacity in mild steel
MRC:
Indicates the type of column provided on the item.BNRZ
Column Type:
Round
MRC:
Designates the size of the drill chuck the item will accommodate.BNSC
Drill Chuck Size Accommodated:
5/8 in. Keys
MRC:
The distance from the center of the spindle to the column.BNSD
Distance From Spindle Center To Column:
17.500 inches
MRC:
Indicates the type of base working surface provided on the item.BNSF
Base Working Surface Type:
Slotted
MRC:
The physical configuration of the base working surface.BNSG
Base Working Surface Shape:
Rectangular
MRC:
Indicates the location of the item on which the base working surface is mounted.BNSL
Base Working Surface Mounting Location:
Column
MRC:
The maximum distance from the chuck or spindle nose to the base working surface.BNSM
Maximum Distance From Chuck/spindle Nose To Base Working Surface:
24.500 inches
MRC:
The measured distance the head can be adjusted vertically.BPSX
Head Vertical Adjustment:
17.000 inches
MRC:
Indicates the type of spindle provided.BQLR
Spindle Type:
Threaded end for drill chuck
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
16
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+260.0/+3650.0
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
115.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
