부품 정보
Operating pressure 175/210 bar; shaft end drilled, countersunk and threaded; connections are off-set from each other ad share the same flange
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
85.0 centimeter-kilograms or 102.0 centimeter-kilograms
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Flange
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
12.0 millimeters
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
3.0 millimeters
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
18.0 millimeters
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
40.0 millimeters
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
380.0 or 460.0
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
100.0 millimeters
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
70.0 millimeters
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Navy weapon system code th, strategic sealift converson ships class; swivel, power hydraulic
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
10.0 millimeters
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Machine keyway
MRC:
A measurement of the longest dimension the shaft extends from the item.ARQA
Shaft Protrusion Length:
82.0 millimeters
MRC:
The number of connections furnished.ASMM
Connection Quantity:
1 and 1
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Inlet and outlet
MRC:
The design of the connection.AXFC
Connection Design:
Flanged
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Variable
MRC:
The spacing in the arrangement of the bolt holes.AZFF
Bolt Hole Spacing:
25.0cm by 43.3 and 25.0cm by 43.3cm
