부품 정보
Strap, retainig-cushioned, rectangular, open bottom
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.852 inches and 2.912 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.500 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.040 inches
MRC:
The distance between the centerline of the mounting holes.AFQM
Distance Between Mounting Hole Centers:
Between 2.414 inches and 2.474 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Oa-9233a/g
MRC:
The element,compound,or mixture of which the cushioning is fabricated,excluding any surface treatment.ALTD
Cushioning Material:
Rubber, synthetic, ams 3209
MRC:
An indication of whether or not a cushion(s) is included.BXQG
Cushion:
Included
MRC:
An indication of whether or not a mounting pad(s) is included.BXQJ
Mounting Pad:
Not included
MRC:
Designates the size of the relative or proportionate dimension of the mounting hole.BYML
Mounting Hole Size:
Between 0.213 inches and 0.223 inches
Distance Between Base And Inside Of Arch:
Between 2.422 inches and 2.452 inches
Inside Diameter/arch Length:
Between 1.609 inches and 1.639 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Strap - cres per ams 5516 or ams 5510 or ams 5513, temp range minus 320 degrees f to plus 600 degrees f; cushion - neoprene (chloroprene) per ams 3209, temp range minus 40 degrees f to plus 212 degree f.
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, ams 5516 or steel, ams 5510 or steel, ams 5513
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 or steel comp 321 or steel comp 304
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight arch
