TXT
묘사:
Packing With Retainer
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
Between 0.433 inches and 0.458 inches
MRC:
A measurement of the smallest dimension of the retainer,in distinction from length or width.ADTJ
Retainer Thickness:
Between 0.045 inches and 0.055 inches
MRC:
The length of a straight line which passes through the center of the packing ring in cross section,and terminates at the circumference.ADTK
Packing Ring Cross-sectional Diameter:
Between 0.067 inches and 0.077 inches
MRC:
The length of a straight line which passes through the center of the packing,and terminates at the inside circumference.AFFX
Packing Inside Diameter:
Between 0.170 inches and 0.190 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
One-piece
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q packing
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 301 or steel comp 302 retainer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 7267 assn standard single material response packing
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5059 condition half hard or annealed military specification single material response retainer
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate retainer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response retainer
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
80205-nas1523 professional/industrial association standard
