부품 정보
Filter media supported on air leaving side with a metal grid
TXT
묘사:
Fluid Filter Element
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
16.000 inches
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Parallel
MRC:
The amount of surface area of the filtering material through which the fluid flows.ADNL
Filtering Surface Area:
5.4 square feet
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
0.02 pounds per square inch
MRC:
The measured rate of air flow at which the filter capacity is established.ADNS
Face Velocity:
500.0 feet per minute
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
1.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Navy weapons code th, strategic sealift conversion ships class
MRC:
Indicates the design type of the item.APGF
Design Type:
Nonreusable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
200.0 degrees fahrenheit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
25.000 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Pleated single filtering media response
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cardboard frame
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cotton filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular (incl square)
