TXT
묘사:
Serrated Lock Ring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.465 inches and 0.472 inches
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Between 0.599 inches and 0.614 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.152 inches and 0.167 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 0.653 inches and 0.662 inches
MRC:
The number of serrations on the outer circumference.AWPM
Outer Serration Quantity:
14
MRC:
The number of serrations on the inner circumference.AWPN
Inner Serration Quantity:
26
MRC:
An indication of the side/s/ from which outer serrations have been omitted to provide for close edge installation.AWQC
Side Outer Serrations Omitted For Close Edge Installation:
Two sides
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, ams 5731, type a286 or steel, ams 5734, type a286
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, ams 5731, type a286 or steel, ams 5734, type a286
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Passivated
