부품 정보
Weapon system essential
TXT
묘사:
Tube Fitting Locknut
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Tube fitting locknut
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.625 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Un
MRC:
The length of a straight line which passes through the center of the packing recess,and terminates at the circumference.CFPT
Packing Recess Diameter:
1.317 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.312 inches
MRC:
The nominal length of a straight line which passes through the center of a tube,and terminates at the outside circumference.CQRJ
Tube Outside Diameter:
1.000 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed-std-66 federal standard single material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
J514 assn standard single treatment response and qq-p-416, type 2, cl 3 federal specification single treatment response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
J514 assn standard single treatment response and qq-p-416, type 2, cl 3 federal specification single treatment response
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
96906-ms51860 government standard and 81343-j514 professional/industrial association standard
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
96906-ms51860 government standard
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
25b figure
