MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.7969 inches and 0.8125 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 0.3743 inches and 0.3748 inches
Err Default:
Err default and err default
End Of Rounded Extension To Right End Of Bearing Distance:
Between 0.6550 inches and 0.6650 inches
Err Default:
Err default and err default
End Of Rounded Extension Of V Groove To Bottom Of V Groove Distance:
Between 0.3320 inches and 0.3370 inches
Err Default:
Err default and err default
V Groove Rounded Extension Radius:
Between 0.1400 inches and 0.1450 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.3125 inches
MRC:
An inside measurement from the top to the bottom of the drilled hole,in distinction from height.AGGQ
Drilled Hole Depth:
Between 0.2500 inches and 0.2636 inches
V Groove Width:
0.2500 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches external cylindrical surface
MRC:
The angle of the v groove.CTWH
V Groove Angle:
44.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 510
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Spring loaded throw out type
