부품 정보
Hose coupling nut of aluminum alloy w/anodized surface treatment
TXT
묘사:
Swivel Flange To Hose Elbow
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
3 1st end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Gripping nipple (nose) 2nd end
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
1.812 inches 1st end
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
3.750 inches 2nd end
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
2.564 inches 1st end
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
2.438 inches 1st end
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Triangular with holes 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded external hose gripping 2nd end
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
50.0 pounds per square inch 1st response
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
500.0 pounds per square inch 2nd response
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
600.0 pounds per square inch 3rd response
MRC:
The angle that the flow is turned from the straight flow.CRFY
Flow Angle:
90.0 degrees
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.312 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.344 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
2.312 inches 1st end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised swivel 1st end
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.018 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
1.780 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.CWDW
Inside Diameter Hose Accommodated:
1.125 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the outside circumference.CWDZ
Outside Diameter Hose Accommodated:
1.500 inches 2nd end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1010 elbow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1022 flange
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1335 nipple
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1335 shoulder
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal specification single material response
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel 2nd response
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Hydraulic fluid 3rd response
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Oil 1st response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 1, cl 2 federal specification single treatment response inside
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 1, cl 2 federal specification single treatment response outside
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.TMQY
Furnished Items And Quantity:
1 hose coupling nut
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
96906-ms28744 government standard
