TXT
묘사:
Aviation Stud Wire Rope Terminal
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Left-hand
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.297 inches and 0.302 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.875 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.098 inches and 0.103 inches
Undercut Diameter:
Between 0.405 inches and 0.438 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABXG
Overall Length:
Between 5.391 inches and 5.407 inches
Plain Shank Length:
Between 2.688 inches and 2.750 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the circumference.ADCS
Plain Shank Diameter:
Between 0.558 inches and 0.625 inches
MRC:
The length of a straight line which passes through the center of the accommodated material,and terminates at the circumference.AHNK
Accommodated Material Diameter:
0.281 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.625 inches
MRC:
The measured load required to break the item in tension.BZQQ
Breaking Strength:
8000.0 pounds
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.438 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
