부품 정보
Small chamfer end may have 0.031 in. Min 0.062 in. Maximum radius
TXT
묘사:
Headless Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
Between 1.240 inches and 1.260 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 0.2509 inches and 0.2511 inches
First End Taper Length:
Between 0.031 inches and 0.062 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.053 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
36.0 rockwell c and 40.0 rockwell c
MRC:
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.CQSX
Shear Strength:
7200 double pounds per square inch
First End Taper Angle:
Between 20.0 degrees and 30.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches outside diameter
Second End Taper Angle:
Between 4.0 degrees and 12.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 410 or steel comp 416
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
