부품 정보
Operasting temp range is -85 degrees f to +325 degrees f; no-load torque is 0.0007 inch maximum radial play and 0.0028 inch maximum axial play
TXT
묘사:
Self-aligning Plain Bearing
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.7500 inches and 0.7505 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Navy code llkjua001
Outer Member Outside Diameter:
Between 1.4370 inches and 1.4375 inches
Outer Member Width:
Between 0.5880 inches and 0.5980 inches
Inner Member Width:
Between 0.7480 inches and 0.7500 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
28.0 rockwell c external outer member and 37.0 rockwell c external outer member
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
55.0 rockwell c internal inner member and 62.0 rockwell c internal inner member
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic tetrafluoroethylene inner layer
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 440c internal inner member
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel external outer member
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 (17-4ph) assn standard single material response external outer member
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5360 440c assn standard single material response internal inner member
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
With insert and/or liner
