TXT
묘사:
Vehicular Clutch Disk
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
13.999 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
Between 12.532 inches and 12.572 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 0.082 inches and 0.098 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.034 inches and 0.044 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter:
13.999 inches
MRC:
A measurement taken at right angles to the length of the lug,in distinction from thickness.AHMM
Lug Width:
3.000 inches
MRC:
The angle between the lugs,expressed in degrees.AJAS
Angle Between Lugs In Deg:
120.000
MRC:
Indicates the design type of the item.APGF
Design Type:
Wet
MRC:
Indicates the location of the item to which a specific material is applicable.AQQF
Material Location:
One side
MRC:
The physical configuration of the item.ARJD
Design Form:
Solid
MRC:
Indicates the type of disk.BPLM
Disk Type:
External lug
MRC:
The length of a straight line which passes through the center of the material,and terminates at the outside circumference.BSPG
Material Outside Diameter:
Between 12.532 inches and 12.572 inches
MRC:
The length of a straight line which passes through the center of the material,and terminates at the inside circumference.BSPH
Material Inside Diameter:
Between 10.531 inches and 10.566 inches
MRC:
The means by which the facing is attached.BSPL
Facing Attachment Method:
Bonded
MRC:
The smallest length of a straight line which passes through the center of the two surfaces of a circular item,and terminates at the inside circumference.BSPX
Smallest Inside Diameter:
Between 10.531 inches and 10.566 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Friction material facing and material facing groove
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.CYBJ
Disk Material:
Steel
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
