MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.125 inches
MRC:
A measurement taken at right angles to the length of an internal keyway,in distinction from thickness.ABLM
Internal Keyway Width:
0.188 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.500 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.6260 inches and 0.6270 inches
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
1
MRC:
The distance from the center of the bore to the bottom of the keyway(s).AEVF
Distance From Center Of Bore To Bottom Of Keyway:
Between 0.392 inches and 0.397 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
1
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter,and the thread location.CQBP
Screw Thread Series Designator And Location:
Single hole unc
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Threaded single hole
MRC:
A designation that is used for the purpose of general identification of the thread and the location.CRWB
Thread Size And Location:
0.250 inches single hole
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Brass, qq-b-626, alloy 260, 1/2h or brass, qq-b-626, alloy 268, 1/2h
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 260 or copper alloy 268
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-626, alloy 260, 1/2h federal specification 1st material response and qq-b-626, alloy 268, 1/2h federal specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain round
