TXT
묘사:
Shop Softwood Lumber
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.CQKJ
Random Width:
4 inches and wider with a min of 60pct to be 8 inches and wider
MRC:
An indication of the species and grade of the item,and the grading association.CQWY
Species-grade And Grading Association:
Pine, eastern white d select northern hardwood and pine manufacturers association or pine, idaho white quality western wood products association or pine, ponderosa d select western wood products association or pine, ponderosa prime finish western wood products association or pine, norway d select northeastern lumber manufacturers association or pine, norway d select northern hardwood and pine manufacturers association or pine, sugar d select western wood products association or pine, sugar prime finish western wood products association
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Err Default:
Err default
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Moisture Content Retention Percentage:
15.0
MRC:
A measurement of the longest dimension of an item,in distinction from width.CRJD
Random Length:
4 ft and longer with a maximum of 5pct to be 4-7 ft and a min of 50pct 12 ft and longer
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness,its location on the item,and the measuring method used.CRPW
Width-location And Measuring Method:
4.000 inches random
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
4.000 feet random
MRC:
The extent of surface dressing or roughness of the item.CRYQ
Surface Condition Degree:
Surfaced two sides
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width,its location on the item,and the measuring method used.CSHP
Thickness-location And Measuring Method:
2.000 inches specified
MRC:
The required purpose or application of the typical wood products for which the item is intended.CSTS
Typical Wood Products Use:
Cutting quality finish grades used in lieu of shop grades for remanufacturing and finish purposes
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Unit of issue-bf
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81348-mm-l-751 government specification
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
I table
