MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.980 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Plate
MRC:
A measurement of the longest dimension of the nut,in distinction from width.ACVN
Nut Length:
0.724 inches
MRC:
A measurement of the smallest dimension of a plate,in distinction from length or width.ADEB
Plate Thickness:
0.032 inches
MRC:
A measurement taken at right angles to the length of a plate,in distinction from thickness.ADEC
Plate Width:
0.215 inches
MRC:
The means by which the nut is mounted.ADFP
Nut Mounting Provision:
Countersunk holes
MRC:
The side of the plate that the countersink or welding projections are located.ADFR
Mounting Provision Location:
Nut projection side
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
2 holes
Distance From Aperture Center To Mounting Hole Center:
0.250 inches
MRC:
A measurement of the center to center distance between the mounting holes along the length.ADFY
Center To Center Distance Between Mounting Holes Along Length:
0.500 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Unf
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.190 inches
MRC:
The included angle of the mounting hole countersink.CSSM
Mounting Hole Countersink Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
