MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.7500 inches
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Anpt
MRC:
The number of screw threads on the item per linear inch measured on a line parallel to the thread axis,including incomplete threads.AJYQ
Screw Thready Qty Per Inch (tpi):
14.0
MRC:
Indicates the design type of the item.APGF
Design Type:
Double end
MRC:
Indicates the type of thread provided.BPCR
Thread Type:
Single
MRC:
Indicates the type of gage provided on the item.BRXZ
Gage Type:
Limit
MRC:
A measurement indicating the diameter-pitch per measurement scale of the threaded portion that is stamped on the item.BRYG
Thread Stamped Pitch Diameter:
Between 0.9543 inches and 0.9889 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of a screw thread design.BRYH
Thread Design Pitch Diameter:
Between 0.9543 inches and 0.9889 inches
MRC:
The range of variation permitted on the pitch diameter.BSDL
Pitch Diameter Tolerance:
-0.00000/+0.00030 inches and -0.00000/+0.00030 inches
MRC:
An indication of whether or not tapered threads are included.BSDM
Tapered Threads:
Included
MRC:
Indicates the location of the pitch diameter on the pitch cone.BSDN
Err Default:
Err default
MRC:
Indicates the location of the pitch diameter on the pitch cone.BSDN
Pitch Cone Pitch Diameter Location:
Gaging notch
MRC:
Indicates the type of the item as illustrated in military specification mil-p-7105.BSDP
Design Type Per Mil-p-71 Designator5:
L1 and l3
MRC:
An indication of whether or not a thread major diameter truncation feature is included.BSDQ
Thread Major Diameter Truncation Feature:
Included
MRC:
The major length of a straight line which passes through the center of the truncated outer most surface,and terminates at the circumference.BSDR
Truncated Major Diameter:
Between 0.995 inches and 1.034 inches
MRC:
A designation indicating the length of the truncation.BSDS
Truncation Length Designation:
Full
