TXT
묘사:
Portable Duct Type Heater
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Hand carry
MRC:
Indicates the heat medium type for which the unit is designed.ABAM
Heat Medium Type:
Air
MRC:
The position of the outlet(s) on the item.ABAQ
Outlet Position:
In the same direction
MRC:
The number of heat outlets included on the item.ABAW
Heat Outlet Quantity:
2
MRC:
The direction in which the heat is discharged from the item.ABAX
Heat Delivery Direction:
Vertical
MRC:
Indicates the type of outlet(s) provided for the discharge of heat.ABAY
Heat Discharge Outlet Type:
Stationary
MRC:
Indicates the device/s/ provided for the purpose of directing the flow of heat.ABAZ
Heat Directing Device:
Flexible ducts
MRC:
The mechanism used for air circulation.ABBA
Air Circulation Device:
Squirrel cage blower
MRC:
The different speeds at which the item may be operated.ABBB
Speed Adjustments:
Single speed
MRC:
The maximum rated capacity of air flow moved through the item.ABBD
Maximum Air Flow Rate:
Any acceptable
MRC:
Indicates the type of air the item is designed to circulate.ABBE
Circulated Air Type:
Heated
MRC:
Indicates the location of the flue connection.ABFH
Flue Connection Location:
Any acceptable
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
14.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
13.000 inches
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Diesel engine
MRC:
Indicates the type of device which controls the operation of the item.ALYC
Operating Control Type:
Hand switch
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
20.0 and 10.0
MRC:
Indicates the type of heating element provided.BDXJ
Heating Element Type:
Burner
MRC:
The means used for purposes of igniting.BLJC
Ignition Method:
Manual
MRC:
The chemical compound or mechanical mixture properties of which the inclosure is fabricated.CQSJ
Inclosure Material:
Steel
MRC:
The amount of fuel the item is rated to consume per hour.CQTY
Fuel Consumption Rate Per Hour:
Not rated
MRC:
The rate of heat delivery of the item.CQXD
Heat Delivery Rate:
230000.0 british thermal unit
MRC:
The amount of fuel that the integral tank will hold.CRJT
Integral Fuel Tank Capacity:
28.0 gallons
MRC:
The means by which the fuel is fed to the item.CSGC
Fuel Feed Method:
External pressure
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0 and 440.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Designed to provide adjustable heat output for heating of aircraft on the ground
MRC:
Indicates the type of fuel(s) for which the item is designed.FUEL
Fuel Type:
80/87 octane gasoline and 100/130 octane gasoline and 91/96 octane gasoline and 115/145 octane gasoline
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
42.000 inches
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1
MRC:
Indicates the date the item was entered into mil-hdbk-300.NTRD
Entry Date:
85-08-16
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
Af to. 35e7-2-5-1/-3/-4
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-h-26934 government specification
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Md-1 type
