부품 정보
Terminal bent 45 degrees 0.109 in. From shunt end! Brush front undercut 0.062 in., 0.469 in. From top of brush! Brush top shape beveled with rectangular slot! Top bevel slopes to front of brush
TXT
묘사:
Electrical Contact Brush
MRC:
Standard location by position number for shunt/s/.AABU
Shunt Position Designator:
3 and 9
MRC:
The speed of the commutator or slip-ring for which the item is designed.AACQ
Peripheral Speed:
5000 feet per minute
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Rectangular commutator
MRC:
The measurement between specified points of the slot,in distinction from height.AAZT
Slot Depth:
0.047 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.375 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.250 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.250 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
1.125 inches
MRC:
A measurement of the longest dimension of the brush shunt,in distinction from width.AHXP
Brush Shunt Length:
1.219 inches single shunt and 1.719 inches single shunt
MRC:
A measurement of the longest dimension of the brush shunt,in distinction from width.AHXP
Brush Shunt Length:
1.219 inches and 1.719 inches single shunt
Terminal Hole Diameter:
0.196 inches
MRC:
The sytle designation indicating the configuration that most nearly corresponds to the appearance of the contact face.CQGT
Contact Face Style:
Beveled
MRC:
The angle of the bevel.CQPY
Bevel Angle:
30.0 degrees
MRC:
An indication of whether or not a covering material is provided and the number of shunts included.CRBG
Shunt Insulation Provision And Quantity:
2 uninsulated
Outer Edge To Slot Edge Distance:
0.438 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Terminal bent 45 degrees 0.109 in. From shunt end brush front undercut 0.062 in., 0.469 in. From top of brush brush top shape beveled with rectangular slot top bevel slopes to front of brush
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Electrographitic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Morganite inc, grade ec3x mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
One piece
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
1 flag w/hole
