TXT
묘사:
Aviation Turbine Fuel
MRC:
The number of the volume,form,or the dosage within each unit package.AKKF
Quantity Within Each Unit Package:
55.0 gallons
MRC:
The percentage by weight of the maximum sulphur content of the item.CLFT
Maximum Sulphur Content Percentage By Weight:
0.4
MRC:
An indication of the maximum temperature at which the item will freeze.CLFZ
Freezing Point Maximum Temp:
-46.0 degrees celsius
MRC:
A classification indicating the rated grade of the fuel.CLWH
Fuel Grade Classification:
Jp-5
MRC:
The kinematic units (centistokes/mm 2/s) of the item at a rated temperature.CQLQ
Viscosity At Rated Temp:
8.53 -20 degrees celsius
MRC:
A measurement of the maximum aromatics occuring in the item,expressed in percent by volume.CRWW
Maximum Aromatics Percentage By Volume:
25.0
MRC:
An indication of the maximum temperature at which a certain distillation point is reached,expressed in percent.CRWZ
Distillation Point Percentage At Maximum Temp:
245.3degcelsiusat90.0percent
MRC:
The designator which is assigned to the product by the nato military agency for standardization(mas).CSGW
Nato Code Number:
F44
MRC:
An indication of the maximum amount of matter remaining after distillation,expressed in percent.CSLJ
Maximum Distillation Residue Volume Percentage:
1.5
MRC:
An indication of the astm copper corrosion classification in accordance with ip 154,astm d130 at 100 deg celsius.CSTK
Copper Corrosion Classification Number:
1b
MRC:
The quotient of the product mass by its volume at a specified temperature.CSWR
Density Value:
0.788 kilograms per liter
MRC:
A measurement of the maximum olefins content of the item,expressed in percent by volume.CTBQ
Err Default:
Err default
MRC:
The number of thermal units which is released by combustion of the mass unit of the fuel (formed,uncondensed water) in oxygen.CTCF
Minimum Heat Of Combustion Value:
42.6 megajoules per kilogram
MRC:
An indication of the maximum amount lost by distillation,expressed in percent.CTDH
Maximum Distillation Loss Volume Percentage:
1.5
MRC:
A numeric value of the minimum temperature at which the vapor will ignite,and the test method.CTJC
Minimum Flash Point And Test Method:
60.0 degrees celsius pensky-martens closed cup
MRC:
The temperature at which the density is determined.CTYG
Density Temp:
15.0 degrees celsius
MRC:
A classification used to identify the supply form by which the item is delivered.CWAY
Supply Classification:
Packaged
MRC:
The mass,in milligrams,of the residue obtained by evaporation of 100 milliliters of the product.CWDB
Maximum Amount Of Existent Gum:
7.0
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-milt5624 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
