MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Braided
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
Not rated
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
500.0 degrees fahrenheit
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Any acceptable
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.375 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.375 inches
MRC:
The element,compound,or mixture with which the item is treated to induce friction.ADZF
Friction Treatment Material:
Plastic, polytetrafluoroethylene
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Oil
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Asbestos, mil-p-24377
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Asbestos and plastic polytetrafluoroethylene and petrolatum
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-24377 military specification single material response