TXT
묘사:
Horizontal Turret Lathe
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
8 turret stations; 1, 000 ft memory tape; 1 postprocessor; 1 readout, display system; 1 nameplate; 1 lubrication chart; 1 loading crane; 1 automatic chip removal conveyor; 1 chip pan
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
30.000
MRC:
The source of power which drives the item.ATJK
Power Source:
Electric motor
MRC:
The maximum length of a straight line which passes through the center of the bar stock accommodated,and terminates at the circumference.BTSX
Maximum Bar Stock Diameter Accommodated:
3.000 inches
MRC:
The maximum distance of the chuck over the universal carriage.BTSY
Maximum Chucking Distance Over Universal Carriage:
12.000 inches
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+28.0/+2000.0
MRC:
A measurement of the actual swing over the bed of the item.BTTF
Actual Swing Over Bed:
18.000 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
12.000 inches
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0 and 460.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
