부품 정보
Flexible fittings, hose assembly, supply to hpac air cooler
TXT
묘사:
Nonmetallic Hose Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees fahrenheit and 200.0 degrees fahrenheit single response
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.750 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Misc parts list for ac - cw, flexible fittings, virginia class ssn
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
1.500 inches 1st end
MRC:
A measurement from the bottom to the top surface of a raised face,in distinction from depth.AJED
Raised Face Height:
0.620 inches 1st end
MRC:
The design used in constructing the end portion of the flange.AKUT
End Flange Construction:
Solid 1st end
MRC:
The physical configuration of the outside of the end connection.AKUU
End Connection Design:
Straight 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Raised face flange 1st end
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Reusable end fittings
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
14 1st end
MRC:
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD
Burst Test Pressure:
2000.0 pounds per square inch
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
1st layer braided polyester cord and outer layer wrapped rubber, synthetic
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
500.0 pounds per square inch
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.750 inches 1st end
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
15.000 inches excluding end fittings
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Round w/ bolt holes 1st end
MRC:
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.CWDW
Inside Diameter Hose Accommodated:
0.896 inches 1st end
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
End fitting has 4 bolt holes; o.D. Of hose is 1.234 in; assembly includes: 2 fittings, str end, hose x thd, -16 hose x 2.00 in-12un on nsn 4730-01-314-8819, 2 hoses, double poly braid, 0.880 i.D. X 1.230, 15 in long on nsn 4720-00-194-8911, 1 elbow, 90 deg, hose to hose (-16 hose) on nsn 4730-00-504-7509, 1 tag assembly, hose up to 4.00 in in diameter per cage 96169/2633-225-01, sheet 4-6
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Water single response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Nps 1st end
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-h-24136/3 government specification
